You can wash a dog bed with stuffing in a washing machine if its care label allows it: remove loose hair, use a gentle cycle and mild detergent, then dry the filling completely. If the cover or inner cushion is not machine-safe, wash it by hand instead.
This matters because trapped moisture inside stuffing can create musty odours, encourage mould, and leave the bed uncomfortable or unsafe for your dog. Ignoring dirt and dampness can also set stains deeper, spread bacteria around your home, and make the cushion clump or lose its shape.
This guide is for dog owners cleaning padded beds, bolster beds, crate mattresses, and removable covers. The safest method changes if the bed has foam, memory foam, waterproof backing, delicate fabric, glued seams, or a non-removable insert, so check its construction before adding water.
The common mistake is treating every stuffed bed like an ordinary blanket and relying on a quick wash to solve the problem. Water can reach the outer fabric while the centre stays wet, and aggressive heat can shrink fabric or damage fibres. A better approach is to inspect the label, remove debris first, and dry slowly with regular checks.
Before washing, press the cushion firmly in several places and smell the centre, not just the cover. If it feels lumpy, smells sour, or releases dampness, plan extra drying time; after washing, squeeze out water with towels rather than twisting the filling.
The following sections show you how to check the bed and care label, prepare it, wash it safely, and dry the stuffing thoroughly. You will also learn what to do when a washer is unsuitable and how to prevent odours, clumps, and repeat stains with simple routine care.
Check The Bed, Filling, And Care Label
Before deciding how to wash a dog bed with stuffing, inspect every part of it while it is dry. A quick check tells you whether the cover, inner cushion, and filling can safely handle water, detergent, and machine movement.
| Check | What to look for | Why it matters |
|---|---|---|
| Removable cover | Zips, snaps, sewn-in cushions, and loose liners | A separate cover is usually easier to clean and may have different care instructions from the filling. |
| Filling material | Polyester fibre, foam, memory foam, cotton, wool, or shredded material | Fibre fill may tolerate gentle washing, while foam can hold water, tear, or lose its shape. |
| Stains and odours | Urine, vomit, grease, mud, mildew, or heavily soiled patches | Severe contamination may need spot treatment or professional cleaning before a full wash. |
| Damage and care label | Open seams, weak stitching, exposed zips, holes, “hand wash,” “spot clean,” or “do not wash” symbols | Water can spread damage or release filling, and ignoring the label can permanently deform the bed. |
Do not wash the bed until you have repaired loose seams, removed toys or inserts, and checked that the filling is not already damp or mouldy. If the label limits cleaning to spots or hand washing, follow that instruction rather than relying on the bed’s outer fabric alone.
Prepare The Dog Bed For Washing
Before you learn how to wash a dog bed with stuffing, prepare it carefully to keep loose hair and grit out of your washing machine. A few minutes of dry cleaning and spot treatment also helps protect the fabric, seams, zip, and filling during the wash.
- Take the bed outside and shake it firmly to release loose dirt, crumbs, and dander. Avoid shaking it indoors, where dust and hair can settle on nearby surfaces.
- Vacuum both sides of the bed, paying attention to seams, corners, piping, and the zip area. Use a crevice tool gently so you do not catch or pull the fabric.
- Remove every detachable insert, cushion, blanket, and toy from the bed. Check pockets and compartments for treats, tags, or small objects that could damage the washer.
- Close the zip fully and fasten any Velcro tabs or loose straps. If the zip pull is exposed, cover it with a small piece of fabric or place the bed in a large mesh laundry bag.
- Blot fresh stains with a clean cloth, then pre-treat marked areas with a small amount of pet-safe detergent. Do not scrub aggressively or soak the stuffing before it goes into the machine.
Give the bed one final inspection for torn seams or loose threads. Repair weak areas first, because agitation can enlarge a small tear and release stuffing into the drum.
How To Wash A Dog Bed With Stuffing
Learning how to wash a dog bed with stuffing safely means using gentle movement, cool water and controlled drying. Follow the care label first, then choose a machine or hand-washing method that cleans the cover and filling without forcing the stuffing into tight clumps.
- Shake off loose hair and remove any detachable cover. Close zips and fasten hook-and-loop panels so they cannot catch or stretch during washing.
- For a machine-washable bed, place it in the washer with a small amount of mild, pet-safe detergent. Select a gentle cycle with cold or lukewarm water, and avoid bleach, fabric softener and strong fragrance.
- Wash the bed by hand if the label requires it. Submerge it in a clean bath or large basin, press the soapy water through the stuffing gently, and avoid twisting or scrubbing the filling.
- Rinse until the water runs clear and no slippery detergent remains. In a washer, use an extra rinse if available; by hand, change the water several times.
- Support the wet bed from underneath while lifting it. Press out water with your hands or against the basin side, but do not wring it, since twisting can distort the filling.
- Before drying, gently spread the stuffing back into place and check for detergent residue or remaining stains. If the bed still smells or looks dirty, repeat the wash rather than adding more detergent.
Wash the bed alone or with similar soft items so it has room to move. Keep the load balanced, and stop the cycle if the filling bunches severely or the washer begins to thump.
Dry The Stuffing Completely
Drying takes as much care as washing because trapped moisture can create mildew, sour smells, and flattened filling. Do not return the bed to your dog until the cover and stuffing feel completely dry throughout.
- Check the care label before choosing a dryer. If machine drying is allowed, use a low-heat or air-only setting; high heat can shrink the cover, damage waterproof layers, or melt synthetic fibres.
- For a large or delicate bed, air-dry it in a warm, well-ventilated place. Lay it flat on a clean rack or hang it only if the weight will not stretch the fabric, and turn it every few hours.
- Pause the drying process several times to shake and rotate the bed. Press and massage thick areas with your hands to separate damp clumps and help air reach the centre.
- Redistribute the filling once it is partly dry. Push stuffing gently from overfilled corners into thin areas, then fluff the bed from both sides so the padding sits evenly.
- Test for trapped moisture before reuse. Feel the seams, corners, underside, and middle of the thickest section; also smell for a musty or sour odour. If any area feels cool, heavy, or damp, continue drying and check again later.
Use a fan to improve airflow, but do not aim intense heat directly at the bed. If the filling remains damp after extended drying, remove it from service rather than risking mould or skin irritation for your dog.
What To Do If The Bed Cannot Go In The Washer
If you are deciding how to wash a dog bed with stuffing that cannot enter your washer, match the method to its condition. Choose the gentlest option that removes the dirt without leaving the filling damp for hours or damaging the cover.
| Method | Best for | Limits | Key step |
|---|---|---|---|
| Spot cleaning | Small stains, muddy paws, and fresh spills | Will not remove deep odours or widespread grime | Blot, do not scrub, then rinse the area lightly and dry it fully |
| Bathtub washing | Removable or sturdy beds with broad surface dirt | Heavy when soaked; slow to dry and easy to overwet | Use cool water and mild detergent, press out water, and rinse until clear |
| Laundromat machine | Large beds labelled machine-washable but too big for your washer | Not suitable for fragile seams, loose filling, or non-washable fabrics | Use a large front-loading machine and check the care label first |
| Replacement | Persistent odour, mould, torn seams, or badly clumped stuffing | Costs more, but avoids repeated cleaning failures | Replace when the filling no longer supports your dog or cannot dry safely |
A bathtub is usually the practical fallback for a sound bed, but do not wash it if you cannot create a warm, ventilated drying space. For an old or damaged bed, replacement is safer than trapping moisture inside the stuffing.
Prevent Odours, Clumps, And Repeat Stains
Once you know how to wash a dog bed with stuffing, simple upkeep helps it stay fresh between washes. Remove loose hair and dirt regularly so they do not settle into the filling.
- Vacuum the bed or use a lint roller weekly, especially around seams where fur and grit collect.
- Use a washable cover or blanket and clean it often; let your dog onto the bed only when its coat and paws are reasonably clean.
- For small accidents, blot promptly rather than rubbing. Use a pet-safe enzymatic cleaner that suits the fabric, follow its label, and test it on a hidden spot first.
- Skip bleach, ammonia, and heavily scented sprays. They can irritate your dog, damage fabric, or mask odours without removing the source.
- Check seams and filling for dampness, lumps, or a persistent musty smell. Air the bed in a dry, well-ventilated place between uses, and do not cover it while damp.
- Give the bed a deeper clean if odour or stains remain after spot treatment, or if it has been exposed to urine, vomit, or parasites.
Replace it if the stuffing stays clumped or smells after cleaning, the cover is torn beyond repair, or the filling has mould or mildew. These problems can be difficult to remove fully and may make the bed uncomfortable or unhygienic.
A Clean, Fully Dry Bed For Your Dog
Learning how to wash a dog bed with stuffing safely comes down to checking the care label, using a gentle cycle, and drying the filling completely. Rushing the drying stage can leave damp pockets that cause mildew, odours, or lumpy stuffing, so give the bed plenty of time and turn it regularly.
Before your dog uses it again, check for lingering moisture, loose seams, or damaged filling. If machine washing is unsuitable, spot-clean or hand-wash the bed instead, and remove hair and fresh stains regularly to make each deeper clean easier.